PNME Cutting Nozzle

Cutting nozzle PNME cutting nozzle Murex cutting nozzle A. PNME-CUTTING NOZZLE: 1. PNME cutting nozzles are of two piece design made up of a brass inner nozzle with splines and a hollow drawn copper outer sheath. 2. The reason that PNME’s differ from ANME is that different gas mixing criteria apply. 3. Oxy-propane has a lower burning velocity than oxy-acetylene and this requires two things to develop good flame conditions. 4. First, turbulence must be created between the inner and outer parts of the nozzle to obtain adequate mixing of the propane and oxygen. 5. Secondly, the volume of mixed oxy-propane needs to be more than double that of oxy-acetylene for the same usable heat. 6. This is achieved by having very large channels (the splines) to conduct the greater gas volumes. B. Specification: SizesOrifice Sizes (mm)Cutting Thickness (mm)1/320.83-103/641.210-251/161.625-755/642.075-1253/322.4125-1757/642.8175-2251/83.2225-300